Choosing High temperature Hard Hats Fiber resinforce resin safety helmet: Application Fit and Specification Checks

What the product listing confirms

The published product information for the High temperature Hard Hats Fiber resinforce resin safety helmet lists:

Selection criteria to check

1. Application fit

The listed application is construction work. If you are buying for a different setting, such as foundries, furnace areas, electrical work or chemical handling, the listing does not cover it. Ask the supplier for written confirmation and supporting documents before treating the helmet as suitable for that use.

2. Shell material

The shell is listed as fiberglass. Buyers who specifically want a fiberglass or fiber resin shell can shortlist this model. The listing does not give impact, penetration or chemical resistance values beyond the standard references below.

3. Heat exposure: confirm, don't assume

"High temperature" is part of the product name.

4. Standards and certificate documents

The listing names CE EN 397 as a certificate and ANSI/ISEA Z89.1-2009 as a standard. Your company sells into the United States, the Middle East, Europe and Southeast Asia, so check which standard your market and customers require. Then ask for the current certificate and test documents for the exact model and configuration you are ordering. The listing does not say which ANSI type or class applies, or which optional EN 397 requirements are covered, so get this in writing.

5. Weight, size and suspension

The listed weight is 600g and the listed size is **4827.9419.05cm. The suspension is a 4-point cradle with Terylene webbing**. Workers wear helmets for long shifts, so compare this weight and suspension with your current helmets. If you can, trial samples with the people who will wear them. The listing does not include a head-size adjustment range, so confirm it if you need it.

6. Branding and color

The listing shows OEM color and the brand name Care. Distributors who need custom colors should confirm the available options, minimum quantities and any branding terms directly. The listing does not include those details.

When this helmet may not be the right choice

• You need a documented temperature rating, and the supplier cannot provide one.
• Your work environment is outside construction work, and the suitability for it has not been confirmed in writing.
• Your market requires a standard or classification not covered by the listed CE EN 397 and ANSI/ISEA Z89.1-2009 references.
• You need accessories such as visors, ear-muff slots or chin straps. The listing does not mention any.

Information to request before ordering

The listing contains no prices, lead times, minimum order quantities or warranty terms. Ask Hebei PuNuosen Safety Equipment Co .,Ltd for:

1. Certificate and test report copies for CE EN 397 and ANSI/ISEA Z89.1-2009, matched to the model.
2. Any tested heat or temperature limits that support the "high temperature" description.
3. The size adjustment range and accessory compatibility.
4. OEM color and branding options, with commercial terms.

Summary

The High temperature Hard Hats Fiber resinforce resin safety helmet is listed as a fiberglass construction helmet. It weighs 600g, has a 4-point Terylene webbing cradle and is offered in OEM colors, with CE EN 397 and ANSI/ISEA Z89.1-2009 references. It is a sensible candidate for buyers who need a fiberglass shell for construction work. Treat its heat performance and any use outside construction as unconfirmed until the supplier provides documents.